09-17-2007 12:27 PM - edited 07-03-2021 02:38 PM
Hi,
Is there a way to tell remotely if an antenna has been connected to a specific radio interface (just as you are able to see a serial cable connected to a serial interface) ?
Thank You,
Dragos
09-17-2007 07:45 PM
(Assuming you mean a couple autonomous APs versus several APs connected in a LWAPP system).
Aside from looking for the RSSI (Signal Strength indicators) and making an educated guess, I'm pretty sure there's not.
Good Luck
Scott
10-16-2007 05:07 PM
Well if they are 1242 ap's, the b/g side is where the console and ethernet goes, a is on the other side and is closer together. Is this what you are looking for?
10-16-2007 05:15 PM
Not really - I am looking for a "show *" way of telling remotely wether any antenna has been connected to the antenna port. I am not trying to locally identify the physical ports available on the access point.
Regards,
Dragos
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide