09-17-2007 11:02 PM - edited 03-05-2019 06:32 PM
I am using an 2948G-L3 and its current system is using a CAT OS and I want to change it to IOS version. Does someone have a procedures or links that will guide me on this process? Thanks
09-17-2007 11:15 PM
Hi Jaime,
2948G-L3 only runs IOS and never supports CATOS. I believe you have 2948G only which only supports CATOS and cannot be upgraded or converted to IOS.
HTH
Ankur
*Pls rate all helpfull post
09-17-2007 11:41 PM
Oh yes, it is a 2948G,anyway, do you have any documents on how do I start configuring the basic configurations. LIke the IP, default gw, passwords and so on...
09-18-2007 12:29 AM
Hi Jaime,
This link will guide you how to configure your switch
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.1/configuration/guide/supcfg.html
HTH
Ankur
*Pls rate all helpfull post
09-18-2007 06:57 AM
Thanks...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide