Switch port setting for Call Manager

Answered Question
Sep 18th, 2007

Hi,

Just wanted to run a quick check with you guys. I appreciate the help. I have data on vlan 10 and voice on vlan 20. For the switch port that CCM connects to, would I assign it as an access switchport, but in the voice vlan?

interface FastEthernet0/20

description ***Call Manager Server***

switchport access vlan 20

My other ports have an IP phone with a pc connecting to the back of the phone:

interface FastEthernet0/0

description ***Phone+PC***

switchport mode access

switchport access vlan 10

switchport voice vlan 20

spanning-tree portfast

Thank you in advance for the help.

Tom

I have this problem too.
0 votes
Correct Answer by rob.huffman about 9 years 2 months ago

Hi Tom,

You are right on the money! We are using the same "best practice" config here.

Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
rob.huffman Tue, 09/18/2007 - 05:06

Hi Tom,

You are right on the money! We are using the same "best practice" config here.

Hope this helps!

Rob

Actions

This Discussion