09-18-2007 10:00 AM - edited 03-05-2019 06:33 PM
Hi,
We have 6509 Catalyst switch with MSFC card(SUP 32). Both are having different OS. One is running on CAT OS while MSFC is running on IOS. We want to upgrade CAT OS to native. Can someone help me on this. We have upgraded DRAM to 512 MB for this upgradation.
Thanks in Advance.
Rajesh
Solved! Go to Solution.
09-18-2007 10:23 AM
Rajesh,
Here is the document for converting Cat OS to IOS
Hope that helps
Regards,
~JG
09-18-2007 10:23 AM
Rajesh,
Here is the document for converting Cat OS to IOS
Hope that helps
Regards,
~JG
09-18-2007 10:30 AM
Rajesh, I've done this long time ago in lab using Sup2/MSFC2s so I cannot speak for sup32s but the process is very much the same.
read this document creafully before attempting the convertion.. hope others can comment on this for any other assistance or tips.
conversion process from hybrid to native..
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#intro
Cisco EDI CatOS to IOS Configuration Conversion Tool -
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml
HTH
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: