cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1168
Views
0
Helpful
1
Replies

WS-C3750G-48TS power faulty

bedevere.curry
Level 1
Level 1

We have a stacked 3750 that has RPS supplying but the main power is fine. Is there a reason why it's not failing back over? Is there a way to force this?

thx

nj02ga03oas44#show env all

FAN is OK

TEMPERATURE is OK

Temperature Value: 36 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 56 Degree Celsius

Red Threshold : 66 Degree Celsius

POWER is FAULTY

RPS is SUPPLYING

nj02ga03oas44#

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Fri 28-Jul-06 12:55 by yenanh

Image text-base: 0x00003000, data-base: 0x010272D8

ROM: Bootstrap program is C3750 boot loader

BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)

1 Accepted Solution

Accepted Solutions

Jagdeep Gambhir
Level 10
Level 10

Hi,

Switch will not auto sense that the power came back on. Switch has to be reload to reconnect to main power.

Regards,

~JG

Please rate helpful posts

View solution in original post

1 Reply 1

Jagdeep Gambhir
Level 10
Level 10

Hi,

Switch will not auto sense that the power came back on. Switch has to be reload to reconnect to main power.

Regards,

~JG

Please rate helpful posts

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card