09-19-2007 12:02 AM - edited 03-03-2019 06:49 PM
Hello.
I though traffic shapping was only "out" of the interface.
In that case why the Cisco Ios is actually giving us the possibility of configuring it as "in" AND "out" under the interface configuration ?
R1(config-map-class)#frame-relay cir ?
<1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second
in Incoming CIR
out Outgoing CIR
09-19-2007 12:20 AM
Hi,
As a router can also be used as a frame-relay switch, it makes sense to have inbound shaping capabilities.
Router(config)#frame-relay switching
The local or remote switching capabilities are configured with "frame-relay route ..." or "xconnect ..." commands.
Regards, Martin
09-19-2007 12:50 AM
Thanks !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide