09-19-2007 05:02 AM - edited 03-14-2019 11:37 PM
I had consultative transfer working fine (CME).. but it now appears to have stopped working
My config is below. When I transfer a call it is blind transferred.. any ideas?
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
secondary-dialtone 9
Solved! Go to Solution.
09-19-2007 04:17 PM
Your ephone-dns also need to be dual-line. I also recommend being more specific with the transfer-pattern command. For instance if your internal numbers are in the range of 3000 to 3999, use the transfer-pattern 3... command. This prevents the pause that may be there after transferring when only having the .T pattern.
09-19-2007 04:17 PM
Your ephone-dns also need to be dual-line. I also recommend being more specific with the transfer-pattern command. For instance if your internal numbers are in the range of 3000 to 3999, use the transfer-pattern 3... command. This prevents the pause that may be there after transferring when only having the .T pattern.
09-20-2007 02:01 AM
It would appear that my dual-line is missing from all of my ephone-dn's. Ive replaced them and my consult is back. Thanks very much!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: