Public Secure Packet Forwarding does not appear to be working on APs

Unanswered Question
Sep 19th, 2007

I have enabled PSPF on my Cisco APs and protected ports on the switch ports. Yet wireless clients can still see each other on the wireless net. Am I missing a step? Shouldn't host A ( not be able to browse/ping host B (

Example AP

interface Dot11Radio0.100

bridge-group 100

bridge-group 100 subscriber-loop-control

bridge-group 100 port-protected

Example Switch Port

description BlueAP

switchport trunk encapsulation dot1q

switchport trunk native vlan 99

switchport trunk allowed vlan 99-102

switchport mode trunk

switchport nonegotiate

switchport protected

duplex full

speed 100

no mdix auto

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
engineerangelo Thu, 10/11/2007 - 02:10


PSPF is used only when you don't want wireless clients to access shared folders with each other. Try it.



This Discussion



Trending Topics - Security & Network