09-19-2007 01:12 PM
Hi,
I am in Bolivia, the questions is if is posible to join by a VPN a PIX CISCO 515 with a Router RV042 of LINKSYS, please help me...thanks
09-20-2007 12:07 AM
I know that it is definitly possible to connect a Pix515 with a Linksys router, i've done it before.
For me it was actually quite simple: I followed the wizard on the Linksys and i configured the Pix515 as I would normally do.
You can find more information about configuring a Pix515 here: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
A HowTo for configuring a RV042, remember that this is for a Client connection to a Macintosh, not a Pix!) But it gives you some information about which steps you need to take to configure the Linksys:
http://www.equinux.com/cms_components/us/products/vpntracker/media/files/HowTo_Linksys_RV042.pdf
I hope this information helps!
Please rate if the post is usefulll!
Regards,
Michael
09-21-2007 04:42 AM
I concur with mfreijser, I too have configured an RV042 to connect to a Pix 515. IMO the most confusing part was on the RV042 side rather than on the Pix. I've become so used to the Pix/ASA CLI that sometimes the basic Web GUI forms and menus are hard to follow on the Linksys devices.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide