RME Inventory Collect Failure - "Device sensed, but collection failed"

Answered Question
Sep 19th, 2007
User Badges:

Hi,

Getting the error

"Device sensed, but collection failed" when trying to collect Inventory in RME.

It is a 3750G-12S switch, we have many other similar switches that work fine. I have verified the device credentials and all is Ok.


For the same switch, the config collection is "successful"..!


Any ideas ?

I have attached the IC_Server.log in debug mode, if it helps.


Thanks \\ Naman

Correct Answer by Joe Clarke about 9 years 6 months ago

This is CSCsj60591. The workaround is documented in the bug. It will be fixed in RME 4.0.6, and is already fixed in RME 4.1.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Wed, 09/19/2007 - 15:22
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

This is CSCsj60591. The workaround is documented in the bug. It will be fixed in RME 4.0.6, and is already fixed in RME 4.1.

Actions

This Discussion