traffic blocking

santukumar · ‎09-20-2007

Some traffic has blocked from lan to DMZ. I want to allow all the traffic through it without blocking.

rajbhatt · ‎09-20-2007

Hi,

U could add the following :

access-list inside_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.1

68.2.0 255.255.255.0

and clear xlate and cl loc and cl arp

U have configured 2 nats : but the nat 0 is taking precedence :

nat (inside) 0 access-list inside_nat0_outbound

and static (inside,DMZ) 172.16.0.0 172.16.0.0 netmask 255.255.0.0 though access lists are configured for ip any any

Plz let me know if this works :

Raj