Configuring HWIC-3G-CDMA card ?

Unanswered Question
Sep 20th, 2007

Hi Guys,

I'm having trouble getting this connection up and running. The cellular device is activated and sees the Sprint base 1xRTT network.

I have used the config below, taken from Cisco site.

Any ideas guys ?


chat-script cdma "" "ATDT#777" TIMEOUT 60 "CONNECT"

interface Cellular0/0/0

ip address negotiated

encapsulation ppp

dialer in-band

dialer string cdma

dialer-group 1

async mode interactive

ppp chap password 0 cisco


ip route Cellular0/0/0

access-list 1 permit any

dialer-list 1 protocol ip list 1

line 0/0/0

exec-timeout 0 0

script dialer cdma


modem InOut

no exec

speed 144000

Thanks in advance

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gmarogi Wed, 09/26/2007 - 08:57

What are the other devices involved in your WLAN network. Can you send me the configuration of those devces as well so that I will verify those configurations and will give a solution accordingly.


This Discussion