access-list problems on 1840

Answered Question
Sep 20th, 2007
User Badges:

hi,



I have cisco 8140 router.



The problem is that users can't go to the internet but from the router itself i can ping external ip address.


I have the following routing

p classless

ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xx

ip route 10.0.0.0 255.0.0.0 172.30.21.100

ip route 192.168.0.0 255.255.255.0 172.30.61.100


and the following access-list

access-list 3 permit xxx.xx.xx.xx log

access-list 3 permit 192.168.0.0 0.0.255.255 log

access-list 100 permit ip 192.168.30.0 0.0.0.255 any


what iam doing wrong?


Thank you for any replays



Correct Answer by Richard Burts about 9 years 8 months ago

Bar


There is not enough information here for us to know quite what the problem is. If you can provide some more information telling us which interface is facing inside and what its address and subnet are, which interface is facing outside and what its address and subnet are. Also you have given us two access lists but have not told us on which interface and in what direction they are applied.


If we know the things that I have asked we may be able to identify your problem.


HTH


Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Richard Burts Thu, 09/20/2007 - 10:55
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Bar


There is not enough information here for us to know quite what the problem is. If you can provide some more information telling us which interface is facing inside and what its address and subnet are, which interface is facing outside and what its address and subnet are. Also you have given us two access lists but have not told us on which interface and in what direction they are applied.


If we know the things that I have asked we may be able to identify your problem.


HTH


Rick

visteknetworking Thu, 09/20/2007 - 12:40
User Badges:

Hi Rick,


Thank you for your prompt reply.


The issue has been resolved.



The problem was with the in nat source which i didn't specify



any way thank you

Richard Burts Thu, 09/20/2007 - 12:55
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Bar


I am glad that you got it working. Thank you for posting back to this thread and indicating that it is fixed and how you fixed it. Thank you for using the rating system to indicate that the problem is resolved (and thanks for the rating). It makes the forum more useful when people can read about a problem and can know that they will read about what solved the problem.


HTH


Rick

Actions

This Discussion