WLC 4400 and multiple authentication servers e.g. RADIUS, ACS

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rcullum Thu, 10/11/2007 - 14:40

ACS is a radius server, as well as TACACS+. The WLC can be set up to use one radius server for user auth, and another for WLC admin auth.

Jagdeep Gambhir Thu, 10/11/2007 - 14:53

Yes, that is correct. You can set acs to use both radius and tacacs.

For this you need to add WLC twice in acs-->network configuration. But you need to keep host name different.

eg 1) Host name WLC --->IP x.x.x.x -->Auth using -->radius

2) Host name WLC1--->IP x.x.x.x --->Auth using -->Tacacs.

You need to set up tacacs commands on WLC along with radius commands.



Please rate helpful posts


This Discussion



Trending Topics - Security & Network