09-21-2007 12:17 AM - edited 07-03-2021 02:39 PM
Hi !
I have a strange problem after upgrading from 12.3.11.JA1 to 12.4(3g)JA1 :
!
interface Dot11Radio0
channel 2437
When I write and reload the ap, then
the channel I configure is gone and the ap doesn't choose the correct frequency.
Anybody else also seen this problem ?
09-24-2007 01:50 AM
Hi !
I have found the solution to this odd problem :
!
interface Dot11Radio0
channel 2437
station-role root fallback shutdown
If change my configuration to :
!
interface Dot11Radio0
channel 2437
station-role root
There must be a bug with this fallback configuration.
10-16-2007 03:45 AM
Hi!
I have the same annoying problem with 1242 Accesspoints. The channel configurations simply disappears from the configuration after an reload ?!
Furthermore I had the station-role root fallback shutdown command set, changed it to station-role root, as you suggested, but no success
has to be bug
regards
CS
10-18-2007 05:45 PM
Hello,
Try to use the command "station-role root access-point"
Regards,
10-19-2007 04:48 AM
Thanks, that solved the problem ! BUT
I really want the radio to shutdown if FA0 goes down. I find it kind of weird, that any fallback command brings up the channel frequency problem again.
mit freundlichen Gruessen
CS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide