cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
0
Helpful
4
Replies

Aironet 1130 - 12.4(3g)JA1

rpettersen
Level 1
Level 1

Hi !

I have a strange problem after upgrading from 12.3.11.JA1 to 12.4(3g)JA1 :

!

interface Dot11Radio0

channel 2437

When I write and reload the ap, then

the channel I configure is gone and the ap doesn't choose the correct frequency.

Anybody else also seen this problem ?

4 Replies 4

rpettersen
Level 1
Level 1

Hi !

I have found the solution to this odd problem :

!

interface Dot11Radio0

channel 2437

station-role root fallback shutdown

If change my configuration to :

!

interface Dot11Radio0

channel 2437

station-role root

There must be a bug with this fallback configuration.

chrisschwarz
Level 1
Level 1

Hi!

I have the same annoying problem with 1242 Accesspoints. The channel configurations simply disappears from the configuration after an reload ?!

Furthermore I had the station-role root fallback shutdown command set, changed it to station-role root, as you suggested, but no success

has to be bug

regards

CS

Hello,

Try to use the command "station-role root access-point"

Regards,

Thanks, that solved the problem ! BUT

I really want the radio to shutdown if FA0 goes down. I find it kind of weird, that any fallback command brings up the channel frequency problem again.

mit freundlichen Gruessen

CS

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: