aironet 1200 /1240 problem

Unanswered Question
Sep 21st, 2007
User Badges:

I have the following problem with my APs.

I use snmpset to change an object's value. I set

the new value succesfully, but when i try to get the new value the snmp agent returns the old value.


setting....

[email protected]:/home/teo# snmpset -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 u 2

the agent reports the new value....

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 2

here is the problem....

[email protected]:/home/teo# snmpget -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 255 <======== the old value ======



I have tried snmpset with other objects and it works fine.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gmarogi Thu, 09/27/2007 - 09:55
User Badges:
  • Bronze, 100 points or more

From where did you try to set the snmp values?. Is it from WLSE? or if it is a light weight AP, did you try this with the WCS?

Actions

This Discussion

 

 

Trending Topics - Security & Network