aironet 1200 /1240 problem

theodionys · ‎09-21-2007

I have the following problem with my APs.

I use snmpset to change an object's value. I set

the new value succesfully, but when i try to get the new value the snmp agent returns the old value.

setting....

root@teo:/home/teo# snmpset -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 u 2

the agent reports the new value....

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 2

here is the problem....

root@teo:/home/teo# snmpget -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 255 <======== the old value ======

I have tried snmpset with other objects and it works fine.

gmarogi · ‎09-27-2007

From where did you try to set the snmp values?. Is it from WLSE? or if it is a light weight AP, did you try this with the WCS?