CSM - real server two L3 hop away

Unanswered Question
Sep 24th, 2007
User Badges:

Hi, I have a problem connect to virtual ip if real server is located two L3 hops away from the CSM. routing and configuration looks ok. see attachment.

1. telnet to rserver:80 - established

2. icmp to rserver - ok

3. icmp to vip - ok

4. telnet to vip:80 - connection refused (no fw on data flow)

when I configured rserver in directly attached vlan (attachment: vlan405) connection nr.4 is established. defafault route on the rserver is router in the topology.

any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Martin Kyrc Mon, 09/24/2007 - 04:32
User Badges:

no inservice, inservice on the vserver and it works (??). vserver was in operational state.


This Discussion