Problem with in. call ISDN PRI

Unanswered Question
Sep 24th, 2007
User Badges:

Hi,


I have are strange problem w/ incomming call on mgt8010->ISDN PRI->c3825->ccm5.1. So, 1-15 channels work fine, but 17-31 two-way no voice. Connection are established, no error, on debug isdn all..... but .... no voice.


Thank's for any help.....



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ruslanmaorif Mon, 09/24/2007 - 05:00
User Badges:

On all Layers is fine - ACTIVE.... MULTI_FRAME_ESTABLISH.... all ok

ruslanmaorif Mon, 09/24/2007 - 05:20
User Badges:

Global ISDN Switchtype = primary-net5


%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not apply


ISDN Serial0/0/0:15 interface

dsl 0, interface ISDN Switchtype = primary-net5

L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

The Free Channel Mask: 0xFFFF7FFF

Number of L2 Discards = 0, L2 Session ID = 7

Total Allocated ISDN CCBs = 0

Alberto Sanz Mon, 06/02/2008 - 19:44
User Badges:

Hi,


I have a same problem. Could you solve this problem? How? Thank you very much.


Regards,

--

Alberto

Mohsin Khan Feroz Mon, 06/13/2011 - 22:40
User Badges:

Hi,


If anyone happen to get a solution for this issue? I have also the same issue gong on in my network..


Mohsin..

paolo bevilacqua Tue, 06/14/2011 - 03:02
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Please open new thread for new problem, and include FULL details about it.

Actions

This Discussion