09-24-2007 04:46 AM - edited 03-14-2019 11:41 PM
Hi,
I have are strange problem w/ incomming call on mgt8010->ISDN PRI->c3825->ccm5.1. So, 1-15 channels work fine, but 17-31 two-way no voice. Connection are established, no error, on debug isdn all..... but .... no voice.
Thank's for any help.....
09-24-2007 04:52 AM
What does the Show ISDN Service command display?
09-24-2007 05:00 AM
On all Layers is fine - ACTIVE.... MULTI_FRAME_ESTABLISH.... all ok
09-24-2007 05:20 AM
Global ISDN Switchtype = primary-net5
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not apply
ISDN Serial0/0/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 0, L2 Session ID = 7
Total Allocated ISDN CCBs = 0
06-02-2008 07:44 PM
Hi,
I have a same problem. Could you solve this problem? How? Thank you very much.
Regards,
--
Alberto
06-13-2011 10:40 PM
Hi,
If anyone happen to get a solution for this issue? I have also the same issue gong on in my network..
Mohsin..
06-14-2011 03:02 AM
Please open new thread for new problem, and include FULL details about it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: