L3 Etherchannel Question

Unanswered Question

Hi - i'm trying to configure an L3 Ether-channel between a 6509 & a stacked 3750E.

I'm getting the following, and the ports won't come up. Any ideas?

50-5-STACK#sh etherchannel

Channel-group listing:

----------------------

Group: 7

----------

Group state = L3

Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1

Protocol: -

50-5-STACK#sh etherchannel de

50-5-STACK#sh etherchannel detail

Channel-group listing:

----------------------

Group: 7

----------

Group state = L3

Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1

Protocol: -

Ports in the group:

-------------------

Port: Gi2/0/49

------------

Port state = Down Not-in-Bndl

Channel group = 7 Mode = On Gcchange = -

Port-channel = null GC = - Pseudo port-channel = Po7

Port index = 0 Load = 0x00 Protocol = -

Age of the port in the current state: 0d:00h:07m:38s

Port: Gi3/0/49

------------

Port state = Down Not-in-Bndl

Channel group = 7 Mode = On Gcchange = -

Port-channel = null GC = - Pseudo port-channel = Po7

Port index = 0 Load = 0x00 Protocol = -

Age of the port in the current state: 5d:21h:17m:24s

Port-channels in the group:

---------------------------

Port-channel: Po7

------------

Age of the Port-channel = 0d:00h:18m:49s

Logical slot/port = 10/7 Number of ports = 0

GC = 0x00000000 HotStandBy port = null

Passive port list = Gi2/0/49 Gi3/0/49

Port state = Port-channel L3-Ag Ag-Not-Inuse

Protocol = -

Time since last port bundled: 0d:00h:12m:55s Gi2/0/49

Time since last port Un-bundled: 0d:00h:11m:10s Gi2/0/49

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Tue, 09/25/2007 - 03:05

can you post the interfaces configs participating in etherchannel from both the sides?

Narayan

Actions

This Discussion