Hi - i'm trying to configure an L3 Ether-channel between a 6509 & a stacked 3750E.
I'm getting the following, and the ports won't come up. Any ideas?
50-5-STACK#sh etherchannel
Channel-group listing:
----------------------
Group: 7
----------
Group state = L3
Ports: 2 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol: -
50-5-STACK#sh etherchannel de
50-5-STACK#sh etherchannel detail
Channel-group listing:
----------------------
Group: 7
----------
Group state = L3
Ports: 2 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol: -
Ports in the group:
-------------------
Port: Gi2/0/49
------------
Port state = Down Not-in-Bndl
Channel group = 7 Mode = On Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po7
Port index = 0 Load = 0x00 Protocol = -
Age of the port in the current state: 0d:00h:07m:38s
Port: Gi3/0/49
------------
Port state = Down Not-in-Bndl
Channel group = 7 Mode = On Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po7
Port index = 0 Load = 0x00 Protocol = -
Age of the port in the current state: 5d:21h:17m:24s
Port-channels in the group:
---------------------------
Port-channel: Po7
------------
Age of the Port-channel = 0d:00h:18m:49s
Logical slot/port = 10/7 Number of ports = 0
GC = 0x00000000 HotStandBy port = null
Passive port list = Gi2/0/49 Gi3/0/49
Port state = Port-channel L3-Ag Ag-Not-Inuse
Protocol = -
Time since last port bundled: 0d:00h:12m:55s Gi2/0/49
Time since last port Un-bundled: 0d:00h:11m:10s Gi2/0/49
