remote access with 3845

Answered Question
Sep 24th, 2007

Hi,

i want a confirmation that Cisco 3845 ISR with NM-16AM-V2 and NM-1CE1T1-PRI card can be configured as a remote access serveur in order to permit remote client access through isdn and pstn.

Regards

I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 9 years 4 months ago

For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).

The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.

Hope this helps, please rate post if it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Paolo Bevilacqua Mon, 09/24/2007 - 14:32

For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).

The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.

Hope this helps, please rate post if it does!

Actions

This Discussion