09-24-2007 11:47 AM
Hi,
i want a confirmation that Cisco 3845 ISR with NM-16AM-V2 and NM-1CE1T1-PRI card can be configured as a remote access serveur in order to permit remote client access through isdn and pstn.
Regards
Solved! Go to Solution.
09-24-2007 02:32 PM
For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).
The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.
Hope this helps, please rate post if it does!
09-24-2007 02:32 PM
For modem access via PRI you also need PVDM2-DMxx where x is the number of simultaneous calls you need (avail 8, 16 and 32).
The NM-16AM-V2 instead has internal modems using analog lines and is not needed if using PRI exclusively.
Hope this helps, please rate post if it does!
09-24-2007 03:22 PM
Ok. Thanks a lot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide