VWIC-2MFT-T1-DI?

aamercado · ‎09-24-2007

The VWIC-2MFT-T1-DI is a drop/insert module for CAS but can it

also support PRI as per below:

Can a VWIC-2MFT-T1-DI= support MGCP with Primary-NI to Callmanager 4.2.3sr1?

I have the following in my 3725.

c3725-advipservicesk9-mz.124-8a.bin with 128F/256M

NM-HDV and VWIC-2MFT-T1-DI= with below

SIMM slot 0: PVDM-12 SIMM present.

SIMM slot 1: PVDM-12 SIMM present.

SIMM slot 2: PVDM-12 SIMM present.

SIMM slot 3: PVDM-12 SIMM present.

SIMM slot 4: PVDM-12 SIMM present

Rob Huffman · ‎09-25-2007

Hi Anthony,

My understanding of the VWIC-2MFT-T1-DI was that it could always support standard PRI in addition to Drop and Insert. Just a card that offered additional flexability :) Have a look;

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087b21.html

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

Hope this helps!

Rob