09-24-2007 10:47 PM - edited 03-03-2019 06:54 PM
I have a 2821 router with HWIC-4T running 124-13d.bin
The problem is that i am able to bring up 2 ciruits on only port 0/0/1 and 0/0/3. If the same cabe is extended to port 0/0/0 or 0/0/2 it does not come up.
Configurations are exactly similar. I tried this with another 2821 and another HWIC-port and there it works only on port 0/0/1 & 2 but not on others. Are there any known problems with this module?
interface Serial0/0/1
bandwidth 2000
no ip address
encapsulation ppp
no fair-queue
serial restart-delay 0
no cdp enable
ppp multilink
ppp multilink group 1
Ambi
09-24-2007 11:05 PM
Is the multilink group configured with a ppp multilink links maximum?
Kevin Dorrell
Luxembourg
09-25-2007 12:54 AM
No on the other side we have this configuration on the multilink
ppp multilink
multilink min-links 3 mandatory
no ppp multilink fragmentation
multilink-group 1000395
no clns route-cache
I got 3 out of 4 links up but the strange behavior is that one circuit comes up on one HWIC port and does not on another port
Tried restarting, IOS upgradation, changing the router slot but the problem remains
One link is not coming up, and when this is swapped to a port with a working circuit, it cones up. But the working circuit does not come up on this port
Ambi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: