data call for transfer capability=3.1kHz Audio

Unanswered Question
Sep 25th, 2007
User Badges:

Hello,


i cannot establisg a call from bri to E1. Iam doubting part of the debug which shows

Transfer Capability = 3.1kHz Audio


will the above message (parameter) allow incoming data calls?




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 09/25/2007 - 11:34
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

The call is coming as either voice or fax/modem. Whic hardware do you have, and what is calling ?

cfajardo1_2 Tue, 09/25/2007 - 21:13
User Badges:

calling party is BRI and the called party is E1.


we cannot establish the call. But if we do it the other way around (E1 to BRI) it will work.


we have this conf on E1

controller E1 2/0

framing NO-CRC4

pri-group timeslots 1-10,16

interface Serial2/0:15

no ip address

encapsulation ppp

dialer pool-member 5 max-link 2

isdn switch-type primary-net5

isdn incoming-voice modem

ppp authentication chap

ppp multilink



paolo bevilacqua Wed, 09/26/2007 - 01:46
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

which hardware and IOS are you using ?

Actions

This Discussion