retrieving bgp peers via snmp

Unanswered Question
Sep 25th, 2007
User Badges:

Hi all, I used to monitor bgp peer states in a cisco 7600 configured for VRF using snmp.

I used the 'bgpPeerState' MIB and the output was the full set of configured BGP peers.

Now I upgraded the IOS to 12.2(33)SRB1 and the same MIB give me no answer.

Anyone else tried this before?

Thank you in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
David Stanford Tue, 09/25/2007 - 05:17
User Badges:
  • Cisco Employee,

I haven't seen any problems with this MIB in this code...can you post your snmpwalk output here?

cineca Tue, 09/25/2007 - 05:20
User Badges:

sure, I got:

SNMPv2-SMI::mib- = No Such Instance currently exists at this OID

David Stanford Tue, 09/25/2007 - 06:29
User Badges:
  • Cisco Employee,

How are you actually performing the walk? Can you send your syntax?

cineca Tue, 09/25/2007 - 06:35
User Badges:

snmpwalk -v2c -c 'removed' routername .

David Stanford Tue, 09/25/2007 - 06:44
User Badges:
  • Cisco Employee,

You might want to open a TAC SR. Make sure to include a show tech from the device and the snmpwalk output. Also, if you have output from a working code it would also be useful


This Discussion