Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3965
Views
0
Helpful
6
Replies

retrieving bgp peers via snmp

cineca
Level 1
Level 1

‎09-25-2007 05:10 AM

Hi all, I used to monitor bgp peer states in a cisco 7600 configured for VRF using snmp.

I used the 'bgpPeerState' MIB and the output was the full set of configured BGP peers.

Now I upgraded the IOS to 12.2(33)SRB1 and the same MIB give me no answer.

Anyone else tried this before?

Thank you in advance.

Denis

Labels:
0 Helpful
6 Replies 6

David Stanford
Cisco Employee
Cisco Employee

‎09-25-2007 05:17 AM

I haven't seen any problems with this MIB in this code...can you post your snmpwalk output here?

0 Helpful

cineca
Level 1
Level 1
In response to David Stanford

‎09-25-2007 05:20 AM

sure, I got:

SNMPv2-SMI::mib-2.15.3.1.1 = No Such Instance currently exists at this OID

0 Helpful

David Stanford
Cisco Employee
Cisco Employee
In response to cineca

‎09-25-2007 06:29 AM

How are you actually performing the walk? Can you send your syntax?

0 Helpful

cineca
Level 1
Level 1
In response to David Stanford

‎09-25-2007 06:35 AM

snmpwalk -v2c -c 'removed' routername .1.3.6.1.2.1.15.3.1.1

0 Helpful

David Stanford
Cisco Employee
Cisco Employee
In response to cineca

‎09-25-2007 06:44 AM

You might want to open a TAC SR. Make sure to include a show tech from the device and the snmpwalk output. Also, if you have output from a working code it would also be useful

0 Helpful

admin
Level 1
Level 1

‎12-19-2007 02:28 AM

I have the same problem, I've upgraded my 3825 from 12.4.10 to 12.4.18 and OID 1.3.6.1.2.1.15.3.1.2 (bgppeerstate) disappeared.

0 Helpful
Customers Also Viewed These Support Documents