09-25-2007 09:28 AM - edited 03-05-2019 06:42 PM
I need alittle clarification on restoring a config via tftp.
I have a PIX 506e running 6.3
I am using the configure net command to upload a new config file to the pix from a tftp server. This command is merging the two files but, I need to over write the current config file with the new one.
what command is needed to restore the config via tftp and overwrite the old one?
Thanks in advance.
09-25-2007 09:49 AM
Eddie
I have not done this on a PIX so I can not speak from experience. But I believe that the process on the PIX is like the process with IOS. When you tftp to running-config it is a merge operation of the new file and the existing file. so you should tftp to startup-config which is a replace operation of the old file. Then you reboot to load the restored file.
HTH
Rick
09-25-2007 10:05 AM
Rick,
The command copy tftp startup-config
doesn't work with pix.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: