RME:Config Archive

Unanswered Question
Sep 25th, 2007
User Badges:

I have 7 Partially Successful devices. The starting and running primary are successful. The Config Type:VLAN failed with the following error:

CM0012: Unable to create new version on archive$1 ACTION: Check if disk space is available and directory has required permissions

I did the ACTION and everything looks fine. I compared the failed devices with the successful devices and they look the same.

How do I fix this problem?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
David Stanford Tue, 09/25/2007 - 11:09
User Badges:
  • Cisco Employee,

Posted on another thread earlier:

The CM0012 error is most likely caused by CSCsh39475. A patch is available on Cisco.com at http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .

If, after applying this patch, you are still seeing errors, you should enable ArchiveMgmt debugging under RME > Admin > System Preferences > Loglevel Settings, reproduce the problem, then look at the dcmaservice.log for errors


This Discussion