Activating CSC-SSM Module with no in house email server

Unanswered Question
Sep 25th, 2007
User Badges:

Hello. I am installing a Cisco 5510 7.1.2 with the CSC SSM Module. for the most part I have the firewall up and running but I cannot activate the CSC module because we do not have an internal email server. When I go thru the wizard I put my domain and address but unsuccesfully finishes the activation so I cannot route http traffic to the module for website blocking/filtering. Is there a workaround to this? Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
tstanik Wed, 10/03/2007 - 05:42
User Badges:
  • Bronze, 100 points or more

email server ip address is not a mandatory field and you can leave it if you do not have or use a email server. If you are not able to finish the activiation there may be some problem with your activaition key or some other setting. Following link may help you

amanytx72 Wed, 10/03/2007 - 08:13
User Badges:

OK yes I have tried activating without the email server IP and get the same error. I will contact TAC for resolution



This Discussion