Activating CSC-SSM Module with no in house email server

amanytx72 · ‎09-25-2007

Hello. I am installing a Cisco 5510 7.1.2 with the CSC SSM Module. for the most part I have the firewall up and running but I cannot activate the CSC module because we do not have an internal email server. When I go thru the wizard I put my domain and address but unsuccesfully finishes the activation so I cannot route http traffic to the module for website blocking/filtering. Is there a workaround to this? Thanks in advance

tstanik · ‎10-03-2007

email server ip address is not a mandatory field and you can leave it if you do not have or use a email server. If you are not able to finish the activiation there may be some problem with your activaition key or some other setting. Following link may help you

http://www.cisco.com/en/US/docs/security/asa/asa71/getting_started/asa5500/quick/guide/CSC_SSM.html

amanytx72 · ‎10-03-2007

OK yes I have tried activating without the email server IP and get the same error. I will contact TAC for resolution

Thanks