Attendant console grabs focus on incoming call

Answered Question
Sep 25th, 2007
User Badges:

I have a user who uses AC to provide busy/free status of lines on their 4.2.3 box. They don't use call control. AC has recently started grabbing focus on incoming calls which is annoying for the user as they are working in other programs when this happens. The user and their IT department claim that nothing has been changed on the PC, and we have made no changes on this user's CM profile. Any thoughts as to what may have changed/how to change it back?

Our last choice would be some software to force the open window to stay on top but since this was what was happening before, there should be some way of returning to that.

Correct Answer by Rob Huffman about 9 years 7 months ago

Hi Joe,


You can use this method to enable / disable "Pop to Top"


Note: To toggle the pop-to-top feature on and off, press Alt + P.


From this doc;


http://www.cisco.com/en/US/products/ps7282/products_user_guide_chapter09186a00806cfff5.html#wp1007405


Hope this helps!

Rob


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 09/26/2007 - 04:23
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Joe,


You can use this method to enable / disable "Pop to Top"


Note: To toggle the pop-to-top feature on and off, press Alt + P.


From this doc;


http://www.cisco.com/en/US/products/ps7282/products_user_guide_chapter09186a00806cfff5.html#wp1007405


Hope this helps!

Rob


joe.bennett Wed, 09/26/2007 - 14:48
User Badges:

Hmm looks like I should have RTFM. Thanks for that, I'd looked but hadn't seen it. That should do the trick.

Rob Huffman Thu, 09/27/2007 - 04:25
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Joe,


I wouldn't feel too bad here :) I always find that the most pertinant facts are almost always the hardest to find with this documentation! This is why I find these forums so helpful. Usually, someone else has encountered the unexpected and unexplained.


Take care and thanks,

Rob

Actions

This Discussion