Cisco 1812 wireles setup, can't get it to work

Unanswered Question
Sep 26th, 2007
User Badges:

Hello everyone,

I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.


I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):

!

ip cef

!

!

ip tcp synwait-time 10

no ip bootp server

ip name-server <removed>

ip name-server <removed>

!

crypto pki trustpoint TP-self-signed-1358229530

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-1358229530

revocation-check none

rsakeypair TP-self-signed-1358229530

!

!

crypto pki certificate chain TP-self-signed-1358229530

certificate self-signed <removed>

quit

username <removed>

!

!

!

bridge irb

!

!

!

interface Null0

no ip unreachables

!

interface FastEthernet0

description $ETH-WAN$$FW_OUTSIDE$

ip address extip extsubnet

ip access-group 101 in

ip verify unicast reverse-path

no ip redirects

no ip unreachables

no ip proxy-arp

ip nbar protocol-discovery

ip flow ingress

ip flow egress

ip nat outside

ip inspect sdm_ins_in_100 in

ip inspect SDM_MEDIUM out

ip virtual-reassembly

ip route-cache flow

duplex auto

speed auto

!

interface FastEthernet1

no ip address

no ip redirects

no ip unreachables

no ip proxy-arp

ip route-cache flow

shutdown

duplex auto

speed auto

!

interface BRI0

no ip address

no ip redirects

no ip unreachables

no ip proxy-arp

encapsulation hdlc

ip route-cache flow

shutdown

!

interface FastEthernet2

!

interface FastEthernet3

!

interface FastEthernet4

!

interface FastEthernet5

!

interface FastEthernet6

!

interface FastEthernet7

!

interface FastEthernet8

!

interface FastEthernet9

!

interface Dot11Radio0

description 802.11g

no ip address

!

encryption mode ciphers tkip

!

ssid <removed>

authentication open

authentication key-management wpa

guest-mode

wpa-psk ascii 7 <removed>

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

bridge-group 1

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

!

interface Dot11Radio1

description 802.11a

no ip address

shutdown

!

encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key

encryption mode wep mandatory

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

!

interface Vlan1

description $FW_INSIDE$

no ip address

no ip redirects

no ip unreachables

no ip proxy-arp

ip virtual-reassembly

ip route-cache flow

bridge-group 1

!

interface BVI1

ip address <internal router ip> <subnet>

ip access-group 100 in

ip nat inside

ip virtual-reassembly

!

ip route 0.0.0.0 0.0.0.0 <external router IP> permanent

!

ip flow-top-talkers

top 5

sort-by bytes

!

ip http server

ip http access-class 1

ip http authentication local

ip http secure-server

<bunch of static nats>

!

<access rules>

!

no cdp run

!

!

!

!

!

radius-server attribute 32 include-in-access-req format %h

radius-server vsa send accounting

!

control-plane

!

bridge 1 protocol ieee

bridge 1 route ip

!

line con 0

line aux 0

line vty 0 4

access-class 102 in

password 7 <removed>

transport input ssh

!

scheduler allocate 4000 1000

!

webvpn context Default_context

ssl authenticate verify all

!

no inservice

!

end

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
AmadejBukorovic Thu, 09/27/2007 - 02:29
User Badges:

Okay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.

Either that or my WPA-PSK configuration is broken.


I switched over to an open network with no encrpytion and everything works now.

deanhjohnson Tue, 12/18/2007 - 06:38
User Badges:

I'm having a similar problem getting Broadcom adapters to connect with WPA-PSK on our 1240AG APs. Does anyone have any suggestions?

Actions

This Discussion