icabrera Wed, 09/26/2007 - 05:42
User Badges:
  • Silver, 250 points or more

Yes, you can use non cisco IP phones with SIP.


Regards

johnleeee Sat, 09/29/2007 - 07:41
User Badges:

Hi all,


first thanks for help. What version of CCME should we use to correctly configure our SIP IP phones. Is over there any documentation how to use CCME and how to configure it with relation to the SIP non Cisco phones?



BR

jl



idmeyerr Wed, 09/26/2007 - 05:45
User Badges:

You can find information on how to configure

CME to support SIP here:


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration

_guide_book09186a008052da6b.html


However,

"CME 4.0 'may' register 3rd party SIP phones, however 3rd party SIP phones are not currently Cisco supported.


While Cisco does comply with RFC3261 standard-based support for Session Initiation

Protocol (SIP),unfortunately at present we don't support 3rd party SIP phones."


here is a link for reference stating support.


http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_whi

te_paper0900aecd80422c70.shtml

johnleeee Sat, 09/29/2007 - 10:50
User Badges:

I have got one additional question.

Where we should start related to version of CCME? I see I can download from Cisco web release from cme-3.0 to 4.2. What is a stable version?


BR

jl

paolo bevilacqua Sat, 09/29/2007 - 11:02
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

CME 4.1, that is IOS 12.4(11)XJ4 is pretty stable.

Most SIP phones are known to work.


Hope this helps, please rate post if it does!

Actions

This Discussion