Can't see phones in Emergency Responder

Unanswered Question
Sep 26th, 2007
User Badges:

I am running CER 1.3(2) with Call Manager 4.1(3)SR4D and I am unable to see phones on the ERL Management page. My CTI route point registers with CM. I am also able to see the switches under switch ports. I have configured the SNMP community strings on all of the CMs and CER and restarted the services. Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
gregorysco Wed, 09/26/2007 - 09:21
User Badges:

Also wanted to add the error we are receiving in the log. Here it is.

240: Sep 26 08:35:23.187 GMT-700 %CER-CER_PHONETRACKINGENGINE-3-ERROR:Thread-9 :GetCCMList$1 run SnmpRequestTimeout on while performing SnmpWalk(*) at index = -1 Source) Source)$ Source) Source)

gregorysco Wed, 09/26/2007 - 10:33
User Badges:

The problem with this was two-fold. There was a space after the SNMP string and also the password was incorrect for the CTI Manager. I had put the password for the CM User. Hope this helps someone in the future.


This Discussion