09-26-2007 09:16 AM - edited 03-05-2019 06:43 PM
I have a ws-c2960g-48 tc-l software ver 12.2.25 SEE3 that when I use SFP GLC-GE-100FX I get duplex errors ports 45-48 do not have the option to set duplex full on them. How do you change duplex from auto to duplex full on them?
Solved! Go to Solution.
09-26-2007 10:11 AM
Jim,
Under the interface specify the media type ( media-type sfp ) then try changing settings see if that works.
go through this document for reference
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swint.html
HTH
Jorge
View solution in original post
09-26-2007 10:23 AM
Thanks for the quick answer. That was the proplem I can now change duplex
Thanks again
Jim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
