PIX Routing

Unanswered Question
Sep 26th, 2007
User Badges:

Hello,


I am a Cisco Newbie so thanks in advance for all help.


I need to set up the firewall to allow our software support company in via rdp.


I have the IP Address of the server they are connecting through, and I have a public address that I think i need to NAT to our servers internal address...


I have both command line access and gui access so all advice would be great.


Thanks Stephen

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JORGE RODRIGUEZ Wed, 09/26/2007 - 16:46
User Badges:
  • Green, 3000 points or more

Stephen, if you have available public IP for the static NAT, do as :


Your local LAN server: IP 192.168.10.10

Your availble public IP : 10.20.30.40


create static nat for local server


e.g


static (inside,outside ) 10.20.30.40 192.168.10.10 255.255.255.255 0 0



create access list to allow traffic , for example RDP


access-list outside_access_in permit tcp any host 10.20.30.40 eq 3389

access-group outside_access_in in interface outside


HTH

Jorge

Actions

This Discussion