Etherchannel on 1841 with a HWIC-4ESW card

Unanswered Question


We're trying to group two ports together on the 1841 router which has a HWIC-4ESW 4-port 10/100 BaseT Ethernet Switch HWIC.

I have tried:


interface Port-channel1

description ???????

switchport trunk encapsulation dot1switchport mode trunk

no ip address


interface fastethernett0/1

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 1 mode on


However it does not seem to accept creating the interface channel. Any help would be appreciated.

Thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion