857W "Unnamed Network"

Unanswered Question
Sep 26th, 2007
User Badges:
  • Bronze, 100 points or more

Hi Gurus,


I have just setup my new 857W, I have Wireless working no problems.


But I was wondering why I have 2 "networks" that I can connect to when I go to "Connect to a network" In Vista?


I have the SSID displaying that I setup, no worries there, but I also have "Unnamed Network" as well, which is definitely coming from my router because they both disappear if I shutdown the interface - and I can also connect to it.


Have I done something wrong, or is there something I have missed?


Also have I configured this correctly using dot1q even though I only want one SSID, or is there a better way I should be doing this?


Cheers.


IOS version is 12.4(15)T1


Config:


dot11 ssid mynet

vlan 1

authentication open

authentication key-management wpa

wpa-psk ascii 7 blah

information-element ssidl advertisement wps


interface Dot11Radio0

no ip address

no ip route-cache cef

no ip route-cache

!

encryption vlan 1 mode ciphers aes-ccm

!

ssid mynet

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

no cdp enable

!

interface Dot11Radio0.1

encapsulation dot1Q 1 native

no ip route-cache

no cdp enable

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Thu, 09/27/2007 - 02:49
User Badges:

Not sure what's happening with my name / account, apologies.

Anonymous (not verified) Fri, 09/28/2007 - 00:45
User Badges:

I worked it out - all I had to do was enable "guest-mode" on the ssid and now I do not see the "Unnamed Network".

Actions

This Discussion