How to send alerts from a switch

Unanswered Question
Sep 27th, 2007

I would like that 3750 switch send me alerts by e-mail when a port state that I choose change.

Is it possible?.

Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
l.mourits Thu, 09/27/2007 - 04:34

Short answer:

No, not possible, at least not from the switch

Long answer:

Not possible from the switch. However, you can configure syslog or SNMP traps on the switch and have the syslog or SNMP trap server send an email on specific alerts.

HTH,

Leo

mirtenmous Thu, 09/27/2007 - 04:51

Where can I see all SNMP commmands available in my 3750 switch with Version 12.2(25r)?.

Do I need any more infraestructure to run SNMP from the switch?.

JORGE RODRIGUEZ Thu, 09/27/2007 - 05:16

Hi Andres,

when logged into switch config mode simply

issue " snmp ? " which will display all snmp sub-commands. Check the link provided for seting up snmp , the only infrastructure addition you would need is seting up a snmp server machine so the switch can send snmp traps to the server for analysis.

seting up snmp

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_35_se/configuration/guide/swsnmp.html

Also there are some monitoring software you could use for collecting snmp information and port utilizization grapher, software such as ciscoworks , you may try some freeware MRTG or PRTG, PRTG easy to setup on windows.

you could try prtg

http://www.paessler.com/download/prtg

or mrtg freeware

http://oss.oetiker.ch/mrtg/

you may also try kiwi syslog real time port state monitoring, or whatsup gold that allows email notification based on port status.

http://www.ipswitch.com/products/whatsup/index.asp?engine=google&cat=wug&k_id=goldprem&gclid=COrMiMvd444CFQIQFQodNj7VPA

HTH

Jorge

Actions

This Discussion