Conference MCU 3511

ricardorojas123 · ‎09-27-2007

Hi,

How I can create a video conference in the MCU 3511?. The MCU 3511 has been agregated than conference bridge, and his status is registered in the call manager, in the Media Resource Group has been agregated the conference bridge 3511. In the Media Resource Group List contains tha MCU. And also I had created the MeetMe number. How I star video conferencing in my thelepne IP with Video Capabilities Enable?. Which is the number the users call for initiate a video conference?

Report Inappropriate Content · ‎10-03-2007

To initiate a multipoint call using an IP/VC 3540 or 3510 MCU, the endpoint dials the appropriateservice prefix followed by a conference ID. (The conference ID can be up to 9 digits long.) If a service on an MCU is 40880 for a 384-kbps call, the user might dial 4088011223, the call would be routed to the MCU using the 40880 service prefix, and the MCU would initiate an ad hoc conference with an ID of 4088011223. Users can also initiate a call and invite the other participants by dialing the conference

ID, the invite string **, and the E.164 address of the another participant.

http://cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf