2811, PVDM2-16, do I need configure 'flex' to support 16ch?

Unanswered Question
Sep 27th, 2007
User Badges:

I confiugred T1 timeslot 1-16 and 'show voice dsp' displays 16 channel but nothing configured under 'voice-card 0'


as per doc, 'medium' codec complexity is default and it supports 8 channel.


Do I have 8 channels only since 'medium' complexity by default? If yes, is it mendatory configuring 'flex' to support 16 channels?


Thanks in advance,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Nelson Fri, 09/28/2007 - 17:18
User Badges:
  • Silver, 250 points or more


Nothing will show up under voice-card 0 if you are just configuring a T1. The voice-card configurations are used for conferencing, transcoding, and MTP resources.


If you have a PVDM2-16 in your router and the T1 configured for slots 1-16, you are using all available DSP resources. If you want to enable the above resources, you will need to add additional PVDM's to your router.


Thank you,

Jon

Actions

This Discussion