Solved: CM5 -> SIP Trunk -> Asterisx :- No license required ????

shahedvoicerite · ‎09-27-2007

Hi,

If a SIP trunk is setup, to a SIP PBX like Asterisk etc, can I have for example 50 users on the SIP PBX side, share the trunk to CM5 ?

If thats the case, I would not need 50 Client licenses if I had SCCP end points directly registered.

I may be wrong, but no license is required for a Trunk connection right ?

Or am I missing something ?

Jon Nelson · ‎09-28-2007

At this time, no licensing is required for a SIP trunk on CM. Any devices you want to register to CM either SIP or SCCP will require a license (phone license in CM3&4 and DLU in CM5&6). If the 50 users are registered to the Asterisk PBX, they will not require licensing.

Thank you,

Jon

View solution in original post

thomasarun · ‎09-28-2007

No need of any licenses i did with CCM 5.1 and Asterisk sip server and its working fine

View solution in original post

Jon Nelson · ‎09-28-2007

At this time, no licensing is required for a SIP trunk on CM. Any devices you want to register to CM either SIP or SCCP will require a license (phone license in CM3&4 and DLU in CM5&6). If the 50 users are registered to the Asterisk PBX, they will not require licensing.

Thank you,

Jon

thomasarun · ‎09-28-2007

No need of any licenses i did with CCM 5.1 and Asterisk sip server and its working fine