cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
288
Views
0
Helpful
2
Replies

Ping fails on POS config

kaustav.gupta
Level 1
Level 1

Hi,

Would like to know if Packet over Sonet tested in Lab if so I have a config which is having issues:

In back to back 7206 with NM-OC3-MM I have configured as follows :

with IP address 10.1.1.1 and 10.1.1.2

int pos4/0

ip add 10.1.1.1 255.255.255.252

pos framing sonet

crc 32

pos scramble-atm

pos flag s1s0 0

I checked for Line alarms there are none and if the layer 1/2 is admin shut the other end goes down. But the ping fails..

Any idea

2 Replies 2

wochanda
Level 4
Level 4

If this is back-to-back, you're going to want 'clock source internal' configured on both sides.

Also, make sure you have 'pos scramble-atm' on the other end.

Hi,

Everything is same except the IP Address.

:)

Regs

Kas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: