PIX515E Telnet from Outside

Unanswered Question
Sep 28th, 2007
User Badges:

Hello,

i don't arrive to connect at PIX515 with command telnet on interface Outside 192.168.0.4 from Cisco 831 '192.168.0.253'.

Internet---C831----------PIX515------LAN

192.168.0.253 168.0.4 10.0.0.11 0.1

When i am inside 'LAN 10.0.0.1' i have not problem to connect at PIX.

On C831 the ping to 192.168.0.4 is ok.

But Telnet

maison#telnet 192.168.0.4

Trying 192.168.0.4 ...

% Connection timed out; remote host not responding

Please, help me.

Best regards,

Fabrice.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
acomiskey Fri, 09/28/2007 - 12:05
User Badges:
  • Green, 3000 points or more

Pix doesn't allow telnet to outside interface, only ssh.

fbru Sat, 09/29/2007 - 02:06
User Badges:

Hello,

Thank you for reply, but i don't make this.

How do you configure this SSH on the Outside interface PIX ?

How do you enable SSH (aaa) on the PIX515 ?

And after is it possible from my C831 to access to PIX with SSH ?

i tried but i don't message error :

maison#ssh 192.168.0.4

I tried with Putty SSH from my pc to interface inside PIX but it doesn't work too.

Best regards,

fbru Sat, 09/29/2007 - 03:46
User Badges:

Hello,

I found to connect in SSH from client pc to if_inside PIX.

i don't found for Outside from C831, i tape this command line:

ssh -c 3des -l pix -v 1 192.168.0.4

but it doesn't work, can you help me please ?

Regards,


jfgobin01 Sun, 09/30/2007 - 23:38
User Badges:

Do you have a line stating :


ssh outside


or


telnet outside


in the pix's config ?


jF

fbru Mon, 10/01/2007 - 00:07
User Badges:

Yes, it's correct, in the pix.

Fab

boonlia123 Sun, 09/30/2007 - 13:25
User Badges:

Hi

Try this

aonnect from internal network and use the command "passwd" to create a telnet password. This will also enable the telnet from outside

hope this works


regards


Boonlia Prince Komal

fbru Sun, 09/30/2007 - 23:32
User Badges:

Hello,

is it possible to connect with telnet session form outside ?

because i have created a password and i have enabled the telnet from outside but it doesn't work ?

only work from inside with my Putty client with telnet and ssh.

On c831, i try to make same think but it doesn,' work too.

jfgobin01 Mon, 10/01/2007 - 00:02
User Badges:

What is the line to authorize telnet or ssh access from outside ?


jF

Actions

This Discussion