cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
922
Views
0
Helpful
6
Replies

NAM (WS-SVC-NAM-2 )

dinesh1977
Level 1
Level 1

Hi I have done the basic configurationin the NAM in 6509 switch . But iam not able to conmmunicate the gateway ( which is the SVI of 6509) from the NAM .Pls help to solve this issue . Pls provide me some basic connfiguration regarding this

Thanks in advance

6 Replies 6

Joe Clarke
Cisco Employee
Cisco Employee

You may be running into a bug (CSCsi45556). Try typing "no supervisor address" on the NAM's CLI, and see if that fixes this.

Hi Clarke,

Thanks for the kind response ...

I tried ,but it seems not working ..

Do i have to do any extra configurations in the switch side ???Pls advice me .

Not for this bug. What software are you running on the switch? Please provide a show run and show ver from the switch as well as the config from the NAM.

Hi Clarke,

Thanks for the response.

iam attaching the version and running configuration details of both the switch and the Nam module. ( I have created one test Vlan "vlan 2" in the 6509 for communicating the nam this is for test setup).

Looks like you're missing the following on your switch:

analysis module 5 management-port access-vlan 2

Hi Clarke,

I have added those commands in the switch . Now iam able to ping the NAM . Thanks for your kind help ...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: