Firewall 515E Start Monitor mode

Unanswered Question
Sep 30th, 2007
User Badges:

Due to power failed two three times the Firewall PIX 515E is starting in monitor mode what to do now?. I tried to download the IOS image by TFTP Command in monitor mode but it is hanging & not connecting TFTP Server.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JORGE RODRIGUEZ Sun, 09/30/2007 - 17:40
User Badges:
  • Green, 3000 points or more

Hi Shams, have you tried in monitor mode

"reaload" to see if pix code loads .


When you said it hangs, before that can you ping tftp server before download?



shams_ejaz Mon, 10/01/2007 - 00:20
User Badges:

Thanks for your reply ! yes i tried to ping its pinging the TFTP Server . and reload cammand also do the soft reboot.

Please advice further,


Thanks,

Shams



JORGE RODRIGUEZ Mon, 10/01/2007 - 04:15
User Badges:
  • Green, 3000 points or more

Do you have smartnet on this pix? given that you have tried tftp new code but pix hangs in the process, you may need to rma it, was this pix power surge protected during power failures, open a TAC case.


Actions

This Discussion